Hohlraumversiegelung Wei/transparent
(Cavity Protection white/transparent)

DESCRIPTION Solvent-based corrosion inhibitor for cavity protection with a high solids content. A thixotropic liquid with good atomizing properties which is capable of reaching areas difficult to access, reaches into and wets narrow spaces between metal panels and displaces moisture. The product contains a high proportion of rust inhibitors and can be used at low temperatures above 10 °C. Creep behavior is improved if the product and bodywork are at room temperature. On drying completely, the product forms a plastic, water repellent waxy film.-

PROPERTIES - High creep

TECHNICAL
DATA Base : wax
Color : white/transparent
Odor : solvent-type
Form : liquid
Density at 20 °C : 0.85 g/cm3
Flash point : 26 °C
Boiling point : 135 °C
Viscosity at 20 °C : 30 seconds
Solids : 47 +/- 2%
Hazard class : aII
Drying time : approx. 1 hour
Salt-spray test ASTM B 117 : more than 500 hours

APPLICATIONS Ideally suitable for all body cavities such as sills, doors, struts and fenders etc.

APPLICATION In the workshop, the product is mainly used for protection of the inner surfaces of cavities, for supplementing existing cavity protection in new vehicles and for the aftertreatment of cavity protection after 2 - 3 years and after accident repairs.

AVAILABLE
PACK SIZE Cavity protection 1 l can Part. no. 6116
10 l Part. no. 6118

Processing equipment
Pressure-feed spray gun for cavities Part. no. 6226